Unit
CarcasE
In 18 mm thick water-repellent (see footnote) particle board panels with low formaldehyde content (class E1), covered on both sides, with mat melamine finish, with front edge in ABS (1 mm thick and other edges in thin laminate (0.3 mm thick).
SHELVES
In 18 mm thick particle board panels with low formaldehyde content (class E1), covered on both sides, with matt melamine finish.
Edging in thin laminate 0.3 mm thick and front edge in ABS 1 mm thick.
GLASS SHELVES
6 mm thick tempered glass slab with polished bevelled edges.
Back panel
White wood fibre panel 3 mm thick, water-based varnish finish.
Colour
Carcase Aluminium Grey; side panels outside Aluminium Grey and inside White, top and bottom panels White on inside and outside.
Front panels
PLAIN VeneerED door
In water-repellent (see footnote) particle board panels with low formaldehyde content (class E1), flame-retardant (see footnote), with veneer (sliced multilaminar wood) in Vein colour.
PLAIN LACQUERED DOOR
19 mm thick fibre board (Medium Density) panel with low formaldehyde content (class E1), melamine finish, edges treated with polyester primer, glossy, mat or metallic lacquered, available in various colours.
FRAME DOOR WITH GLASS
Steel finish Aluminium frame with integral handle and glass panel.
STEEL DOOR
Panel in 18/10 AISI 304 stainless steel with scotch brite finish, internal panel in extruded polystyrene.
GLASS FOR DOOR
Door with frame in Steel-finish Aluminium: Tempered, screen-printed sheet glass 4mm thick with non-transparent or semitransparent frosting.
VARNISHING COMPONENTS
Vein veneered doors:
- acrylic primer.
- mat acrylic finish, outstanding resistance to light.
Lacquered doors, various colours:
Mat lacquered doors:
- water-based primer
- mat water-based top coat with embossed finish, with outstanding resistance to light;
Gloss lacquered doors:
- coloured polyurethane primer
- transparent gloss coating
- brushing on front
- gloss finish on front, outstanding resistance to light.
Metallic gloss lacquered doors:
- metallic polyurethane primer with coloured metal particles
- transparent gloss coating
- brushing of front
- gloss finish on front, outstanding resistance to light.
Drawers and baskets
DRAWERS depth 50 cm
Aluminium sides; Grey melamine bottom panel 16 mm thick; Grey painted metal back panel.
On fully pull-out galvanised metal runners, calibrated to withstand high dynamic loads (50 Kg). Drawer front vertical and horizontal position can be adjusted.
Blumotion closure system.
PULL-OUT BASKETS depth 50 cm
Aluminium sides and side rails; Grey melamine bottom panel 16 mm thick; Grey painted metal back panel.
On fully pull-out galvanised metal runners, calibrated to withstand high dynamic loads (50 Kg). Basket front vertical and horizontal position can be adjusted.
Blumotion closure system.
Pull-out baskets depth 45 cm for base unit for sink.
Tables and chairs
FLUX Table
Frame: in Grey varnished metal.
Top: fixed in Cristalan or Quarz with substrate in fibre board (Medium Density) panels with low formaldehyde content (class E1) with slanted edge, Grey lacquered finish.
FLUX CHAIR
Frame: in Grey or metallic Grey varnished metal.
Back: in methacrylate 10 mm thick
Seat: in regenerated leather.
FLUX STOOL
Frame: in Grey or metallic Grey varnished metal.
Back: in methacrylate 10 mm thick
Seat: in Black regenerated leather.
Accessories
Plinth
Straight: in Aluminium 98 or 148 mm high, with bottom trim in plastic.
Angled: in Aluminium 148 mm high, with bottom trim in plastic.
Shelves
Particle board panel, 30 mm thick, with low formaldehyde content (class E1), with Vein veneer or lacquered in various colours.
Components for units
BASKETS FOR UNITS
In chrome-finish metal wire.
Hinges
In metal with galvanised Copper and Nickel parts.
PLATE-RACKS
Aluminium and PVC frame with Stainless Steel racks.
SHELF MOUNTING BRACKETS
Plastic frame, adjustable hook in galvanised metal and nickel-plated metal cover.
FEET
In hard-wearing plastic; height of feet can be adjusted.
SINK BOTTOMS
In embossed Aluminium.
HANDLES
Single handle in metal alloy with satin nickel finish, fixed length, right-hand or left-hand (right-hand handle is used for flap doors and pull-out fittings)
code 28501.
Bridge-type handle in metal alloy and aluminium with satin nickel finish, variable length,
code 28502.
Single handle in chromium-plated finish metal alloy, fixed length,
code 28504.
| Scavolini panel |
Max.10% |
UNI EN 317 |
| V100 panel |
Max. 12% |
DIN 68763 |
Websolute